Price: Ask for more information.
● Quantitative fixed point lubrication.
● Product inspection, warranty for 1 years.
● Precision machining of piston.
● Traffic, digits can be customized.
1.Maximum working pressure: 16MPa.
2.Minimum starting pressure: 1.4MPa.
3.Standard displacement per port: 0.08ml/cy~0.32ml/cy.
4.Applicable lubricant range (at standard temperature): lubricating oil ≥ N68, grease NLGI 00O #～2#.
5.Working environment temperature: -20℃~+60℃ (low temperature grease should be used at low temperature).
6.Plunger pair with mechanical cycle indicator Maximum cycle rate: 60cy/min.
7.Maximum circulation rate of plunger pair: 200cy/min.
8.Number of working pieces of each group of distributors: 3~8 pieces.
9.The number of lubrication points available for each group of distributors: 3~16 points.
10.The optimal pipe diameter and length of the distributor output: Φ4mm long 0.5~2.5m; 6mm long 1.2~3.5m.
11.Body material and coating: galvanized carbon steel surface.
①⑤Distributor (slice) adjacent oil supply port upper and lower merge status mark:
U: Indicates that the oil outlet is merged with the oil supply port of the adjacent upper piece.
M: Indicates that the oil outlet is merged with the adjacent upper and lower oil feed ports at the same time.
D: Indicates that the oil supply port is merged with the adjacent lower plate oil supply port.
Blank: Indicates that it is not merged with the oil feed port of the adjacent lower piece.
②GPD distributor (piece) specification code for oil supply:
05——0.08ml/cy;
10——0.16ml/cy;
15——0.24ml/cy;
20——0.32ml/cy;
③The combined status mark of the left and right oil supply ports of the distributor (piece):
S: Indicates that the left and right oil feed ports of the film are combined.
Blank: Indicates that the left and right ports are not merged.
④Distributor (piece) to oil port status mark:
T: Indicates that the left and right sides of the film are provided with oil supply ports.
Z: Indicates that the film has no oil supply port.
L: Indicates that the chip has a single outlet, and the oil supply port is set on the left side.
R: Indicates that the chip has a single outlet, and the oil supply port is set on the right side.
⑥Cycle indicator assembly position:
L: Indicates that the piece is equipped with an indicator and is installed at the left end of the piece.
R: Indicates that the sheet is provided with an indicator and is mounted on the right end of the sheet.
Blank: Indicates that there is no indicator for this slice.
